TEMO
Trace Element Mix for Orchids
TEMO includes six important mineral micronutrients which are water-soluble, readily available for plant absorption and very necessary for efficient use of regular fertilizers containing nitrogen, phosphorous and potassium. Serious orchid growers should have a water analysis for mineral content completed or add a minimum supplement to assure proper nutrient combinations. If your plants are not responding properly to regular fertilizer be sure to check micronutrient content of water and compost. You should also check pH of water and compost and adjust it to about 6.5
General applications for orchids and other plants in soilless media: 3 grams per 100 litres. Use sparingly!
To correct deficiencies: 3 grams per 10 litres of water. Use as a light spray on the leaves. One or two applications as necessary. Do NOT repeat unless deficiency is verified.
Guaranteed analysis:
Iron (Fe) 7% or 2.1 ppm
(parts / million in solution as prescribed)
Manganese (Mn) 2% or 0.6 ppm
Zinc (Zn) 0.4 % or 0.12 ppm
Copper (Cu) 0.10% or 0.03 ppm
Boron (B) 1.3% or 0.39 ppm
Molybdenum (Mo) 0.06% or 0.018 ppm
Note: Compost or soil must be wet before application or
you may cause plant injury!
Services
Orchid Mericloning
Orchid Seedraising
Carnivorous Plants
Bromeliads
Flasks of Plants
Cymbidium Orchid Mericlones
Species Orchids Australian
Native Orchids Carnivorous Plants
Supplies & Information
Keikigrow Products
Laboratory Supplies
Deflasking Native Orchids
Books Links